Địa chỉ: 451/25/3A Tô Hiến Thành, Phường 14, Quận 10, HCM

0286 2963 345 097 151 0305

liên kết: Zaloyoutubefacebook
Mô Đun Điều Khiển CRC 49
  • Mô Đun Điều Khiển CRC 49
  • Model: CRC 49
  • Hãng: PAOLO COLOMBO
  • Nguồn điện: 24 -115V 50 Hz – 15% +10%.
    Công suất: xấp xỉ 10 VA.
    Khớp ray: DIN 35 mm.
    Cấp độ bảo vệ: IP 20.
    Nhiệt độ: – 10°+ 55°C.
    Dây cứng: Max.2 x 2.5 mm2.
    Dây tiêu chuẩn: Max. 2 x 1,5 mm2

  • Bảng giá sản phẩm
    Số lượng Giá bán (VNĐ)
    1+ Liên hệ
    5+ Liên hệ
    10+ Liên hệ
    15+ Liên hệ

    Chưa bao gồm VAT.

    Thông tin đặt hàng

    Liên hệ.

    Tối thiểu: 1
    Đặt hàng
  • Mô tả chi tiết
  • Thông số kỹ thuật
  • Bình luận

CRC 49

 

CRC.49 CHAIN BREAKDOWN CONTROL MODULE

Compliant with current regulations

Technical specifications

√ Power supply: 24 -115V 50 Hz – 15% +10%.
√ Intake power: approximately 10 VA.
√ Rail fitting: DIN 35 mm.
√ Degree of protection: IP 20.
√ Assembly position: indifferent.
√ Safety outputs: 4 override contacts 2NC + 2NO 8A 250V.
√ Relay mechanical life span: 5 x 106 operating cycles.
√ Working temperature range: – 10°+ 55°C.
√ Knock tightness voltage lll 3, 5KV.
√ Stiff wire: Max.2 x 2.5 mm2.
√ Standard wire: Max. 2 x 1.5 mm2 (minimum cross-section area 0.5 mm ).


Operation

The camshaft mechanism toothed wheel creates pulses for the CRC.49 by means of a proximity switch. When the stroke stops, the device stops receiving pulses. This consequently energises the output relay (initial condition). The output relay will be de-energised when the stroke and, consequently, the switching mechanism, start again. The contacts powering the valves between automatic stroke shift to top dead centre area can only be powered when the relay is in this position.


Introduction

The CRC.49 is a module for controlling a chain fitted between camshaft and camshaft on a secondary shaft controlling machine stop limit switches at top dead centre (complying with ZH 1/457 article 3.A. 1). The CRC.49 module is made to work in the range from a minimum of 500 pulses to a maximum of 6000 pulses per minute. The module can be adapted according to the required application to obtain a lower number. The number of pulses is obtained by multiplying the number of teeth on the wheel according to press strokes per minute.
Inspection

The CRC.49 module must be regularly inspected at least once a year by an expert. The inspection must be carried out on all components.
Information

The CRC.49 module complies with the safety standards mentioned above. We guarantee compliance with the version inspected by the organisation in charge of issuing CE marking if the module has not been tampered with (i.e. modified).

Sản phẩm cùng loại
đăng ký nhận tin

Nhập email của bạn để đăng ký nhận thông tin từ chúng tôi

google.comtiwtter.comyoutube.comfacebook.com
Hotline: 0286 2963 345
Hotline 2: 097 151 0305
Chỉ đường Zalo Zalo: 0971510305 SMS: 0286 2963 345

Mô Đun Điều Khiển CRC 49