ROSEMOUNT VIETNAM, EJX110A-EMS4G-712DB/FU1/D4

Model	EJX110A: Differential pressure transmitter
Output Signal
Measurement Span (Capsule)
Wetted Parts Material ¹
Process Connections (High Side)
Process Connections (Low Side)	4: with 1/2 inch NPT female process connector
Bolts and Nuts Material	C: 660 SST G: 316L SST J: B7 carbon steel
Installation
Amplifier Housing	1: Cast aluminum alloy 2: ASTM CF-8M stainless steel 3: Cast aluminum alloy with corrosion resistance properties
Electrical Connection
Integral Indicator	D: Digital indicator E: Digital indicator with the range setting switch (push button) N: None
Mounting Bracket
Select Approval	None CF1: Canadian Standards Association (CSA) - Explosionproof Approval CS1: Canadian Standards Association (CSA) - Intrinsically safe Approval CU1: Canadian Standards Association (CSA) - Combined CF1 and CS1 FF1: FM Explosionproof Approval FS1: FM Intrinsically safe Approval FU1: FM Combined FF1 and FS1 KF22: ATEX - Flameproof Approval KS21: ATEX - Intrinsically safe Approval KU22: ATEX - Combined KF22, KS21 and ATEX Intrinsically safe Ex ic SF2: IECEx Scheme - Flameproof Approval SU21: IECEx Intrinsically safe and Flameproof Approval V1U1: IECEx Scheme - Combination of KU22, FU1 and CU1
Painting - Color Change (Optional)	None P: Painting: Color change (Amplifier cover only) PR: Painting: Color change (Amplifier cover and terminal cover, Munsell 7.5 R4/14)
Material certificate and Cover flange, Process connector (Optional)	M11: Material Certificate - Cover flange, Process Connector None
Oil-prohibited Use (Optional)	K1: Oil-prohibited Use - Degrease cleansing treatment K2: Oil-prohibited Use - Degrease Cleansing Treatment with Fluorinated Oilfilled Capsule K3: Capsule fill fluid - Fluorinated oil filled In capsule K5: Oil-prohibited Use with dehydrating treatment - Degrease cleansing and dehydrating treatment K6: Oil-prohibited Use with dehydrating treatment - Degrease cleansing and dehydrating treatment and fluorinated oilfilled capsule None
Calibration Unit (Optional)	D1: P calibration (psi unit) D3: bar calibration (bar unit) D4: M calibration (kgf/cm2 unit) None
Output Limits and Failure Operation (Optional)	C1: Output limits and failure operation - Failure alarm down-scale: Output status at CPU failure and hardware error is -5%, 3.2mA DC or less C2: Output limits and failure operation - NAMUR NE43 Compliant (Failure alarm down-scale: Output status at CPU failure and hardware error is -5%, 3.2 mA DC or less) C3: Output limits and failure operation - NAMUR NE43 Compliant (Failure alarm up-scale: Output status at CPU failure and hardware error is 110%, 21.6 mA or more) None
Long Vent (Optional)	None U1: Long vent - Total length: 119 mm (standard: 34 mm). Material: 316 SST
Optional Specification	A: Lightning protector A1: Gold-plated diaphragm CA: Data configuration at factory - Data configuration for HART communication type (Software damping, Descriptor, Message) DG6: Advanced diagnostics HC: 316 SST Exterior Parts (316 SST zero-adjustment screw and setscrews) HE: Fluoro-rubber O-ring (All O-rings of amplifier housing. Lower limit of ambient temperature: –15°C (5°F)) N4: Wired tag plate (316 SST tag plate wired onto transmitter) PE3: European Pressure Equipment Directive (PED 97/23/EC - Category III, Module H, Type of Equipment: Pressure Accessory-Vessel, Type of Fluid: Liquid and Gas, Group of Fluid: 1 and 2; Lower limit of ambient and process temperature: -29°C X2: Painting - Coating change (Anti-corrosion coating)

Phone	0286 2963 345
Tel	097 151 0035
Thứ 2 - Thứ 6	8h00 - 17h00
Thứ 7	8h00 - 11h30