Thermal Probe TA10 ... ZG2d - standard compact sensor
Thermal flow sensor in probe design with shaft diameter 10 mm and transducer U10b integrated in the connection housing. For applications in pipes with inside diameter from 25 mm.
Measuring instruments having a WiFi interface can be accessed by a web-enabled device via the web interface. It is also possible to check and transfer performance data and to change the device settings. With this new generation of sensors the same unit can be used for a variety of gases also in ex-applications categories 3G and 3D (zone 2 and zone 22). Recalibration or return to the manufacturer when there’s a change of gas won’t be necessary anymore. Only the adequate gas characteristics stored in the device have to be set on the sensor.
Probe material: stainless steel.
Working temperature range -10 ... +140 °C.
Pressure resistance up to 16 bar.
Applications:
Measuring of air/gas velocity, compressed air and gas consumption, leakage flows, laminar flow in clean rooms or machines, in outgoing air, burner supply air, in HVAC systems and air in the low vacuum range at pressures greater than 200 hPa absolute.
Output signals:
- 2 analog outputs 4-20 mA - parameters freely adjustable
- relay for quantity pulse, limit value
- WiFi interface (optional)
- M-Bus (optional). Click here for more M-Bus information
Configurable via an optional keypad in the housing lid or via WiFi interface.
Measuring range
0.2 ... 200 m/s
Pressure resistance
up to 16 bar / 1.6 MPa above atmospheric
Media temperature
-10 ... +140 °C
Media
air (compressed air), nitrogen, methane, natural gas, propane, butane
argon, carbon dioxide, sulphur hexafluoride, helium, hydrogen, landfill gas, oxygen, …
Displayed indicators
Standard flow velocity [Sm/s],
Standard flow rate [Sm³/h] or [Sl/min],
mass flow rate [kg/h],
standard volume [Sm³],
Temperature [° C, ° F],
With optional M-Bus: standard flow rate, mass flow rate, standard volume.
IP protection type
IP65 (connection housing)
Type of protection
ATEX category 3G and 3D (zone 2 and 22) (optional)
Sensor output
2 analog output 4-20 mA, linear, freely configurable
relay for quantity pulse
WiFi (optional)
M-Bus (optional)
| Höntzsch µP-TAD | Hontzsch Viet Nam |
| HONTZSCH UFA/4-20MA/24VDC/LDG16 / UFA420MA24VDCLDG16 | Hontzsch Viet Nam |
| Hontzsch ldx1a flow transducer | Hontzsch Viet Nam |
| Hontzsch Flow meter. TA20/U10 | Hontzsch Viet Nam |
| SFB20E-48 / G 1″ ZG51) B004/ 501 SFB20E-65 / F-DN50PN16ZG12 | Hontzsch Viet Nam |
| B004/101 SFS20E-44 / G 1″ ZG53) B004/500 SFS20E-60 / F-DN50PN16 ZG1 B004/ 100 | Hontzsch Viet Nam |
| SFB 20 E-200 / G 1″ ZG13/0561) | Hontzsch Viet Nam |
| B004/207 | Hontzsch Viet Nam |
| Flow meter UFA, UVA, UTA, U10a, U10M, U10, U12-Ex and U15-Ex, on CD-ROM | Hontzsch Viet Nam |
| Anemometer | Hontzsch Viet Nam |
| Water flow meter | Hontzsch Viet Nam |
| Mass flow meter | Hontzsch Viet Nam |
| Flow measuring technology | Hontzsch Viet Nam |
| Flowmeter | Hontzsch Viet Nam |
| Flow rate measurement | Hontzsch Viet Nam |
| Calibration laboratory | Hontzsch Viet Nam |
| Flow rate meter | Hontzsch Viet Nam |
| Flow rate measuring instruments | Hontzsch Viet Nam |
| Thermal flow sensor | Hontzsch Viet Nam |
| Hoentzsch Art Nr：A018/052, analog end value 0-3m/s=4-20mA | Hontzsch Viet Nam |
| Hoentzsch Art Nr：B014/112, range 0.5; 0.75; 1.0; 1.5; 2.0; 3.0 m/s | Hontzsch Viet Nam |
| Hontzsch Vietnam TA20-500GE 40m/s | Hontzsch Viet Nam |
| 100/p10 ZG8a | Hontzsch Viet Nam |
| B013/ 203 | Hontzsch Viet Nam |
| TA20-300GE 40m/s | Hontzsch Viet Nam |
| 100/p10 ZG9a | Hontzsch Viet Nam |
| B013/ 204 | Hontzsch Viet Nam |
