- Cảm Biến Lực Gicam GC1
- Model: GICAM GC1
- Hãng: Gicam
Cảm Biến Lực Trục Quay
Dãi đo: 25, 50, 100, 200 kg
Ngõ ra: 2 mV/V
Nguồn cấp: Vcc 18 Max
-
Bảng giá sản phẩm
Số lượng Giá bán (VNĐ) 1+ Liên hệ 5+ Liên hệ 10+ Liên hệ 20+ Liên hệ Chưa bao gồm VAT
Thông tin đặt hàng4-6 tuần
Tối thiểu: 1Đặt hàng
- Mô tả chi tiết
- Thông số kỹ thuật
- Bình luận
Cảm biến lực Gicam dùng cho Rulo
Rol load Flange
Possibility of lateral bearing greasing, easy to assemble, possibility of internal amplifier 4-20mA / 0-10V, for bearings Ø32, 35, 40, mm
Click to enlarge image
Technical Specifications
Material | Stainless steel |
Nominal load | 25, 50, 100, 200 kg |
Limit load | 150 % F.S. |
Breaking load | 300 % F.S. |
Supply voltage | Vcc 18 Max |
Output | 2 mV/V |
Output tollerance | 0,1 % F.S. |
Zero tollerance | 1 % F.S. |
Linearity | 0,1 % F.S. |
Hysteresis | 0,05 % F.S. |
Reapeatability | 0,1 % F.S. |
Input resistance | 350-360 ohm |
Output resistance | 350-353 ohm |
Insulation resistance | >= 2000 Mohm |
Creep (30 Minutes) | 0,05 % F.S. |
Thermal compensation | -10 / +40°C (14 / +104°F) |
Operating temperature | -20 / +70°C (-4 / +158°F) |
Temperature deviation zero | 0,003 % F.S. / °C |
Temperature deviation full scale | 0,002 % F.S. / °C |
Protection class | IP 54 |
Connection | Panel male connector CR2R-07APNS |
Standard cable length | Optional: Loose female connector CR2P-07ASNS-10 , connection cable 4 x 0,25 mm2 (length to be defined) |
Download PDF
Connections
Type | CONNECTOR 7P SCC2A-16 |
Length | 5 m (body lead cell not connected shield) |
Pin 1 | + OUT |
Pin 2 | - OUT |
Pin 3 | NC |
Pin 4 | NC |
Pin 5 | NC |
Pin 6 | + IN |
Pin 7 | - IN |
MOUNTING OF THE LOAD CELL
General precautions to be followed in the installation and assembly of load cells:
- Follow the direction of application of force on the load cell
- Do not exceed the limits of the temperature as indicated in the data sheet
- Do not remove labels from the load cell
- Adequately protect the cables with sleeves or channels
- Carry out on each load cell a ground connection with suitable cable, shunt on mounting accessories
- Do not carry out any welding on the mechanical structure after mounting the load cell
- Avoid or reduce to a minimum level any mechanical constraints between the rigid structure and the weighing structure to avoid error in weighing and return to zero
- In case of vibration or dynamic loads product the load cells with puffers / shock absorbers
- Protect load cell from any dust accumulation with any appropriate means
EATON 046938 Motorschutzschalter, 3-polig, Ir = 10 - 16 A, Schraubanschluss
50.000 VNĐ 60.000 VNĐ
Xem chi tiết