Max. resolution (number of steps per revolution x number of revolutions)
13 bit x 13 bit (8,192 x 8,192)
Error limits G
0.5° (at room temperature) 1)
Repeatability standard deviation σr
0.25° (at room temperature) 2)
1) In accordance with DIN ISO 1319-1, position of the upper and lower error limit depends on the installation situation, specified value refers to a symmetrical position, i.e. deviation in upper and lower direction is the same.
2) In accordance with DIN ISO 55350-13; 68.3% of the measured values are inside the specified area.
Interfaces
Communication interface
PROFIBUS DP
Communication Interface detail
DPV0
Data transmission rate (baud rate)
≤ 12 MBaud
Initialization time
Approx. 1 s
Parameterising data
Number of steps per revolution
Number of revolutions
PRESET
Counting direction
Bus termination
DIP switch
Electrical data
Connection type
Male connector, 2x, M12, 5-pin, axial
Female connector, 1x, M12, 5-pin, axial
Supply voltage
10 ... 32 V
Power consumption
≤ 1.5 W
Reverse polarity protection
✔
MTTFd: mean time to dangerous failure
60 years (EN ISO 13849-1) 1)
1) This product is a standard product and does not constitute a safety component as defined in the Machinery Directive. Calculation based on nominal load of components, average ambient temperature 40°C, frequency of use 8760 h/a. All electronic failures are considered hazardous. For more information, see document no. 8015532.
