- Cảm Biến Lực Gicam R85
- Model: GICAM R85
- Hãng: Gicam
Cảm Biến Lực Trục Quay
Dãi đo: 150, 250, 350, 500, 750, 1000
Ngõ ra: 1,8 mV/V
Nguồn cấp: Vcc 18 Max
-
Bảng giá sản phẩm
Số lượng Giá bán (VNĐ) 1+ Liên hệ 5+ Liên hệ 15+ Liên hệ 20+ Liên hệ Chưa bao gồm VAT
Thông tin đặt hàng4-6 tuần
Tối thiểu: 1Đặt hàng
- Mô tả chi tiết
- Thông số kỹ thuật
- Bình luận
Cảm biến lực Gicam R85, Cảm biến lực dạng mặt bích dùng cho Rulo
ROLL LOAD CELL
Features: Possibility of lateral bearing greasing, easy to assemble, possibility of internal amplifier 4-20mA / 0-10V, for bearings Ø32, 35, 40, mm .
Applications: measure of tension tape, tessil, paper, metallic laminated, plastic, flexographic printing presses, photografic development machinery etc.
Click to enlarge image
Technical Specifications
Material | Stainless steel+Steel |
Nominal load | 150, 250, 350, 500, 750, 1000 |
Breaking load | 300 % of full scale |
Maximum transversal load | 500 % of full scale |
Nominal load deflection | 0,12 mm |
Supply voltage | Maximum 18 V dc |
Output | 1 mV/V |
Output tollerance | 0,1 % F.S. |
Zero tollerance | 1 % F.S. |
Linearity | 0,1 % F.S. |
Hysteresis | 0,03 % F.S. |
Reapeatability | 0,1 % F.S. |
Input resistance | 350-360 ohm |
Output resistance | 350-353 ohm |
Insulation resistance | >= 2000 Mohm |
Creep (30 Minutes) | 0,03 % F.S. |
Thermal compensation | -10 / +40°C (14 / +104°F) |
Operating temperature | -20 / +70°C (-4 / +158°F) |
Temperature deviation zero | 0,003 % F.S. / °C |
Temperature deviation full scale | 0,002 % F.S. / °C |
Protection class | IP 54 |
Connection | Panel male connector UTS08E4P |
Standard cable length | Loose female connector UTS6JC8E4S, connection cable 4 x 0,25 (length to be defined) |
Download PDF
MOUNTING OF THE LOAD CELL
General precautions to be followed in the installation and assembly of load cells:
- Follow the direction of application of force on the load cell
- Do not exceed the limits of the temperature as indicated in the data sheet
- Do not remove labels from the load cell
- Adequately protect the cables with sleeves or channels
- Carry out on each load cell a ground connection with suitable cable, shunt on mounting accessories
- Do not carry out any welding on the mechanical structure after mounting the load cell
- Avoid or reduce to a minimum level any mechanical constraints between the rigid structure and the weighing structure to avoid error in weighing and return to zero
- In case of vibration or dynamic loads product the load cells with puffers / shock absorbers
- Protect load cell from any dust accumulation with any appropriate means
EATON 046938 Motorschutzschalter, 3-polig, Ir = 10 - 16 A, Schraubanschluss
50.000 VNĐ 60.000 VNĐ
Xem chi tiết