Địa chỉ: 451/25/3A Tô Hiến Thành, Phường 14, Quận 10, HCM

0286 2963 345 097 151 0305

liên kết: Zaloyoutubefacebook
ELR H5-IES-SC- 24DC/500AC-2 - 2900414
  • ELR H5-IES-SC- 24DC/500AC-2 - 2900414
  • Model: ELR H5-IES-SC- 24DC/500AC-2 - 2900414
  • Hãng: PHOENIX CONTACT
  • Bộ Khởi Động Động Cơ

    Ngõ vào: Điều khiển Trái / Phải

    Nguồn cấp: 24 VDC

    Dãi dòng điện: 180 mA ... 2.4 A

  • Bảng giá sản phẩm
    Số lượng Giá bán (VNĐ)
    1+ Liên hệ
    5+ Liên hệ
    10+ Liên hệ
    20+ Liên hệ

    Chưa bao gồm VAT

    Thông tin đặt hàng

    4-6 tuần

    Tối thiểu: 1
    Đặt hàng
  • Thông số kỹ thuật
  • Mô tả chi tiết
  • Bình luận

Bộ Khởi Đông Cơ - Đảo chiều trái / phải

ELR H5-IES-SC- 24DC/500AC-2 - 2900414

Dimensions

Width 22.5 mm
Height 107 mm
Depth 114 mm
Back to top

Ambient conditions

Ambient temperature (operation) -25 °C ... 70 °C (observe derating)
Ambient temperature (storage/transport) -40 °C ... 80 °C
Maximum altitude ≤ 2000 m
Degree of protection IP20
Back to top

Device supply

Rated control circuit supply voltage US 24 V DC
Control supply voltage range 19.2 V DC ... 30 V DC
Rated control supply current IS 40 mA
Type of protection Surge protection
  Reverse polarity protection
Back to top

Input data

Input name Control input right/left
Rated actuating voltage UC 24 V DC
Triggering voltage range 19.2 V DC ... 30 V DC
Rated actuating current IC 5 mA (Input type 1)
Switching threshold 9.6 V (“0” signal)
  19.2 V (“1” signal)
Switching level < 5 V DC (For EMERGENCY STOP)
Typical turn-off time < 30 ms
Type of protection Reverse polarity protection
Back to top

Output data load output

Output name AC output
Rated operating voltage Ue 500 V AC
Operating voltage range 42 V AC ... 550 V AC
Rated operating current Ie 2.4 A (AC-51)
  2.4 A (AC-53a)
Mains frequency 50/60 Hz
Load current range 180 mA ... 2.4 A (see to derating)
Trigger characteristic in acc. with IEC 60947-4-2 Class 10A
Cooling time 20 min. (for auto reset)
Leakage current 0 mA
Type of protection Surge protection
Back to top

Output data reply output

Output name Acknowledge output
Note Confirmation: floating change-over contact, signal contact
Contact type 1 changeover contact
Switching capacity according to IEC 60947-5-1 3 A (230 V, AC15)
  2 A (24 V, DC13)
Back to top

General

Motor starter type Reversing starter
Switching frequency ≤ 2 Hz (Load-dependent)
Mounting position vertical (horizontal DIN rail, motor output below)
Mounting type DIN rail mounting
Assembly instructions alignable, for spacing see derating
Operating mode 100% operating factor
Maximum power dissipation 3.3 W
Minimum power dissipation 1.1 W
Operating voltage display Green LED
Status display Yellow LED
Indication Red LED
Back to top

Connection data

Connection name Control circuits
Connection method Screw connection
Stripping length 8 mm
Screw thread M3
Conductor cross section solid 0.2 mm² ... 2.5 mm²
Conductor cross section flexible 0.2 mm² ... 2.5 mm²
Conductor cross section AWG 24 ... 14
Torque 0.5 Nm ... 0.6 Nm
  5 lbf-in. ... 7 lbf-in.
Back to top

Connection data 2

Connection name Load circuit
Connection method Screw connection
Stripping length 8 mm
Screw thread M3
Conductor cross section solid 0.2 mm² ... 2.5 mm²
Conductor cross section flexible 0.2 mm² ... 2.5 mm²
Conductor cross section AWG 24 ... 14
Torque 0.5 Nm ... 0.6 Nm
  5 lbf-in. ... 7 lbf-in.
Back to top

Insulation characteristics

Rated insulation voltage 500 V
Rated surge voltage 6 kV
Overvoltage category III
Degree of pollution 2
Designation Insulation characteristics between the control input and control supply voltage, and auxiliary circuit to the main circuit
Insulation Safe isolation (IEC 60947-1/EN 50178) at operating voltage ≤ 300 V AC
  Basic isolation (IEC 60947-1) at operating voltage 300 ... 500 V AC
  Safe isolation (EN 50178) at operating voltage 300 ... 500 V AC
Designation Isolation characteristics between the control input and control supply voltage to auxiliary circuit
Insulation Safe isolation (IEC 60947-1) in the auxiliary circuit ≤ 300 V AC
  Safe isolation (EN 50178) in the auxiliary circuit ≤ 300 V AC
Back to top

Standards and Regulations

Designation Standards/regulations
Standards/regulations IEC 60947-1
  IEC 60947-4-2
  IEC 61508
  ISO 13849
Back to top

Conformance/approvals

Designation ATEX
Identification  II (2) G [Ex e] [Ex d] [Ex px]
   II (2) D [Ex t] [Ex p]
Certificate PTB 07 ATEX 3145
Designation UL approval
Certificate NLDX.E228652
Designation Safety Integrity Level (SIL, IEC 61508)
Identification ≤ 3
Additional text Safe shutdown
Designation Safety Integrity Level (SIL, IEC 61508)
Identification 2
Additional text Motor protection
Designation Performance Level (ISO 13849)
Identification ≤ e
Additional text Safe shutdown
Designation Category (ISO 13849)
Identification ≤ 3
Additional text Safe shutdown
Back to top

UL data

SCCR 100 kA (500 V AC (fuse: 30 A class CC/30 A class J (high fault)))
  5 kA (500 V AC (fuse: 20 A RK5 (standard fault)))
FLA 2.4 A (500 V AC)
Group installation 20 A (class RK5, SCCR 5kA, #24 - 14 AWG max. solid and stranded)
  30 A (class CC or J, SCCR 100kA, #24 - 14 AWG max, solid and stranded)
Category code NLDX
Back to top

Environmental Product Compliance

REACh SVHC Lead 7439-92-1
China RoHS Environmentally Friendly Use Period = 50 years
  For details about hazardous substances go to tab “Downloads”, Category “Manufacturer's declaration”
Sản phẩm cùng loại
đăng ký nhận tin

Nhập email của bạn để đăng ký nhận thông tin từ chúng tôi

google.comtiwtter.comyoutube.comfacebook.com
Hotline: 0286 2963 345
Hotline 2: 097 151 0305
Chỉ đường Zalo Zalo: 0971510305 SMS: 0286 2963 345

ELR H5-IES-SC- 24DC/500AC-2 - 2900414