- Van Giảm Áp XLC 310/410 (RP 115)
- Model: XLC 310/410 (RP 115)
- Hãng: MANKENBERG
Kết nối DN: 40 - 600
Áp suất danh định PN 10, 16, 25
Áp suất đầu vào lên đến 25 bar
Áp suất đầu ra 0,7 - 7 / 1,5 - 15/8 - 24 bar
Kvs-Value 20 - 3235 m3 / h
Nhiệt độ 70 ° C-
Bảng giá sản phẩm
Số lượng Giá bán (VNĐ) 1+ Liên hệ 5+ Liên hệ 10+ Liên hệ 15+ Liên hệ Chưa bao gồm VAT
Thông tin đặt hàngLiên hệ
Tối thiểu: 1Đặt hàng
- Mô tả chi tiết
- Thông số kỹ thuật
- Bình luận
Pilot-operated pressure reducing valve
Pressure reducing valves XLC 310/410 (RP 115)
The pressure reducing valve XLC 310/410 (RP 115)
is a pilot-controlled control valve consisting of main valve with position indicator, control unit, pilot valve, pressure gauge, stop valves and connecting pipes. The main valve cone is fitted with a soft seal. This valve which has been specially developed for drinking water applications, features an electrostatically deposited coating on internal and external surfaces and meets the KTW recommendation of the German Ministry for Health.
The control unit contains adjustable restrictors which allow the control characteristics of the pressure reducer to be matched to the system (closing, opening and response speeds).
The pressure reducer is completely piped. It does not require any additional pilot lines.
Technical Data
Connection DN 40 - 600
Nominal Pressure PN 10, 16, 25
Inlet Pressure up to 25 bar
Outlet Pressure 0.7 - 7 / 1,5 - 15 / 8 - 24 bar
Kvs-Value 20 - 3235 m3/h
Temperature 70 °C
Medium water
Description
Self-acting pressure reducers are simple control valves offering accurate
control while being easy to install and maintain. They control the
pressure downstream of the valve without requiring pneumatic or
electrical control elements.
The XLC 310/410 (RP 115) pressure reducing valve is a pilot-controlled
control valve consisting of main valve with position indicator, control
unit, pilot valve, pressure gauge, stop valves and connecting pipes. The
main valve cone is fitted with a soft seal. This valve which has been
specially developed for drinking water applications, features an
electrostatically deposited coating on internal and external surfaces and
meets the KTW recommendation of the German Ministry for Health.
The control unit contains adjustable restrictors which allow the control
characteristics of the pressure reducer to be matched to the system
(closing, opening and response speeds).
The pressure reducer is completely piped. It does not require any
additional pilot lines.
The pressure difference between inlet pressure and outlet pressure must
be at least 0.5 bar!
The particle size of the medium shall not exceed 0.3 mm, otherwise a
suitable strainer must be installed upstream of the valve.
These valves are no shut-off elements ensuring a tight closing of the
valve. In accordance with DIN EN 60534-4 and/or ANSI FCI 70-2 they
may feature a leakage rate in closed position in compliance with the
leakage classes V.
Standard
» Pressure stage PN 16
» Designed acc. to EN-1074/4
» Flanges as per EN 1092/2
» Body made of spheroidal cast iron GJS 450-10 with epoxy coating in
blue RAL 5005, thickness min. 250 μm
» Internal parts, pilot valve and piping made of stainless steel 1.4301
» Coating as per DVGW W270 and KTW recommendation of the
German Ministry for Health
Options
» Set pressures < 0.7 bar and also up to 25 bar
» Pressure stages PN 10, PN 25
» Body with reduced flow rate
» Throttle cone
» Anti cavitation cone
» Special designs:
- differential pressure control valves
- flow control valve
- float valve
- others on request
Operating instructions, know how and safety instructions must be
observed. The pressure has always been indicated as overpressure.
We reserve the right to alter technical specifications without notice.
.PNG)
| Materials - Main Valve | |
| Temperature | 70 °C |
| Body | spheroidal cast iron GJS 450-10 Epoxy-coated* |
| Cover | spheroidal cast iron GJS 450-10 Epoxy-coated* |
| Internals | stainless steel 1.4301 optional 1.4404 |
| Spring | stainless steel |
| Valve Seal | NBR optional EPDM |
| O-Ring | NBR optional EPDM |
| Diaphragm | NBR-Nylon-reinforced optional EPDM |
| Screws | stainless steel |
* in accordance with KTW-recommendation and DVGW W270, thickness
min. 250 μm
| Materials - Pilot Circuit | |
| Control Unit | stainless steel |
| Pilot Valve | bronze, internals made of stainless steel, diaphragm made of NBR |
| Filter Seeve | 1.4404 |
| Sense Line | stainless steel |
| Fittings | brass |
| Shut-off Valves | brass, nickel plated |
| Dimensions [mm] and Weights [kg] Body Design Standard | |||||
| size | nominal diameter DN | ||||
| 40 | 50 | 65 | 80 | 100 | |
| A | 230 | 230 | 290 | 310 | 350 |
| B | 162 | 162 | 194 | 218 | 260 |
| C | 83 | 83 | 93 | 100 | 118 |
| D | 233 | 233 | 255 | 274 | 316 |
| kg | 18 | 18 | 23,5 | 28 | 39 |
| Dimensions [mm] and Weights [kg] Body Design Standard | |||||
| size | nominal diameter DN | ||||
| 150 | 200 | 250 | 300 | 400 | |
| A | 480 | 600 | 730 | 850 | 1100 |
| B | 370 | 444 | 570 | 680 | 870 |
| C | 150 | 180 | 213 | 242 | 310 |
| D | 431 | 540 | 577 | 598 | 895 |
| kg | 84 | 138 | 264 | 405 | 704 |
| Dimensions [mm] und Weights [kg] Body Design Option PN 25 | |||||
| size | nominal diameter DN | ||||
| 80 | 100 | 125 | 150 | 200 | |
| A | 310 | 350 | 400 | 480 | 600 |
| B | 162 | 218 | 304 | 260 | 370 |
| C | 100 | 118 | 135 | 150 | 180 |
| D | 237 | 273 | 383 | 326 | 433 |
| kg | 24 | 34 | 47 | 54 | 97 |
| Dimensions [mm] and Weights [kg] Body Design Option PN 25 | |||||
| size | nominal diameter DN | ||||
| 250 | 300 | 400 | 500 | 600 | |
| A | 730 | 850 | 1100 | 1250 | 1450 |
| B | 444 | 570 | 680 | 870 | 870 |
| C | 213 | 242 | 310 | 365 | 423 |
| D | 583 | 653 | 735 | 920 | 945 |
| kg | 172 | 304 | 480 | 782 | 922 |
| Customs Tariff Number |
| 84811019 |
