- Van Giám Áp VRCD (DM 644)
- Model: VRCD (DM 644)
- Hãng: MANKENBERG
Kết nối DN: 50 - 150
Áp suất danh định PN: 16 - 40
Áp suất đầu vào: lên đến 40 bar
Áp suất đầu ra: 1,5 - 6 or 5 - 12 bar
Kvs-Value: 15 - 170 m³ / h
Nhiệt độ: 70 ° C-
Bảng giá sản phẩm
Số lượng Giá bán (VNĐ) 1+ Liên hệ 5+ Liên hệ 10+ Liên hệ 15+ Liên hệ Chưa bao gồm VAT
Thông tin đặt hàngLiên hệ
Tối thiểu: 1Đặt hàng
- Mô tả chi tiết
- Thông số kỹ thuật
- Bình luận
Pressure Control Valves
Pressure Reducing Valves VRCD (DM 644)
Epoxy-coated Cast Valve
Technical Data
Connection DN 50 - 150
Nominal Pressure PN 16 - 40
Inlet Pressure up to 40 bar
Outlet Pressure 1.5 - 6 or 5 - 12 bar
Kvs-Value 15 - 170 m³/h
Temperature 70 °C
Medium water
Description
Self-acting pressure reducers are simple control valves offering accurate
control while being easy to install and maintain. They control the
pressure downstream of the valve without requiring pneumatic or
electrical control elements.
The VRCD (DM 644) pressure-reducing valve is a piston-controlled,
spring-loaded proportional regulator with relief for large throughputs.
The housing is made of spheroidal graphite iron with a continuous
epoxy coating. The valve cone is soft-sealed.
The outlet pressure to be controlled is balanced across the control unit
by the force of the valve spring (set pressure). As the outlet pressure rises
above the pressure set using the adjusting screw, the valve cone moves
towards the seat and the volume of medium is reduced. As the outlet
pressure drops, the valve control orifice increases; when the pipeline is
depressurised, the valve is open. Rotating the adjusting screw clockwise
increases the outlet pressure.
These valves are no shut-off elements ensuring a tight closing of the
valve. In accordance with DIN EN 60534-4 and/or ANSI FCI 70-2 they
may feature a leakage rate in closed position in compliance with the
leakage classes V.
Standard
» Designed acc. to EN-1074/4
» Flanges as per EN 1092/2
» Pressure stage PN 16
» Body made of spheroidal cast iron GJS 450-10 with epoxy coating in
blue RAL 5005, thickness min. 250 μm
» Internal parts made of stainless steel 1.4301
» Closed spring cap
» Internal control bore
» Coating as per DVGW W270 and KTW recommendation of the
German Ministry for Health
» Pressure gauge pre-installed
Options
» Internal parts made of 1.4404
» Elastomers made of EPDM or Viton
» Pressure stages PN 25 and PN 40
» Special designs on request:
- Nickel-plated version for air and liquids up to 100°C,
elastomers made of Viton
- Diaphragm-controlled version for higher Control accuracy,
smaller pressure ranges
- High pressure version, pressure stage PN 64, for air and water
- Flanges drilled in acc. with ANSI
Operating instructions, know how and safety instructions must be
observed. The pressure has always been indicated as overpressure.
We reserve the right to alter technical specifications without notice.
| Kvs-Values[m³/h] PN 16 - 64 | ||||||
| Nennweite DN | ||||||
| PN | 50 | 65 | 80 | 100 | 125 | 150 |
| 16 - 40 | 20 | 45 | 70 | 115 | 145 | 170 |
| 64 | 15 | - | 60 | 95 | - | 145 |
| Setting Ranges [bar], Nominal Pressure PN, max. Permissible Reduction Ratio |
||
| bar | 1.5 - 6 | 5 - 12 |
| max. Δp | 4.5 : 1 |
| Materials | |
| Body | spheroidal cast iron GJS 450-10 epoxy coated* |
| Spring Cap | spheroidal cast iron GJS 450-10 epoxy coated* |
| Spring | stainless steel 52SiCrNi5 |
| Internals | stainless steel 1.4301 optional 1.4404 |
| Valve Seal | NBR optional EPDM or Viton |
| O-ring (balance) | NBR optional EPDM or Viton |
| Materials | |
| Body | spheroidal cast iron GJS 450-10 epoxy coated* |
| Spring Cap | spheroidal cast iron GJS 450-10 epoxy coated* |
| Spring | stainless steel 52SiCrNi5 |
| Internals | stainless steel 1.4301 optional 1.4404 |
| Valve Seal | NBR optional EPDM or Viton |
| O-ring (balance) | NBR optional EPDM or Viton |
