- Van Giám Áp SR 6.2
- Model: SR 6.2
- Hãng: MANKENBERG
Kết nối DN: 100 - 400
Áp suất danh nghĩa PN: 16 - 100
Áp suất tối đa. 160 bar
Kvs-Value: 400 - 2400 m3/h
Cvs-Value: 465 - 2791 US gal/min
Nhiệt độ: - 30 đến + 130 ° C
: - 22 đến + 266 °F-
Bảng giá sản phẩm
Số lượng Giá bán (VNĐ) 1+ Liên hệ 5+ Liên hệ 10+ Liên hệ 15+ Liên hệ Chưa bao gôm VAT
Thông tin đặt hàngLiên hệ
Tối thiểu: 1Đặt hàng
- Mô tả chi tiết
- Thông số kỹ thuật
- Bình luận
Pressure Control Valves
Surge Relief Valves SR 6.2
Surge Relief Valve (Peak Load)
Technical Data
Connection DN 100 - 400
Nominal Pressure PN 16 - 100
Set Pressure max. 160 bar
Kvs-Value 400 - 2400 m3/h
Cvs-Value 465 - 2791 US gal/min
Temperature - 30 up to + 130 °C
- 22 up to + 266 °F
Medium liquids
Description
Surge relief valves are used for the decay of pressure surges and of
permanent overpressures within pipeline systems.
SR 6.2K and SR 6.2P are self-energized valves with lowest possible
response times. They operate without any auxiliary or external energy.
The body is of welded design and, therefore, very lightweight
compared with cast ones. Building length, connections and materials
can be customised to any requirement. The straightway valve with
optimised design features the least possible flow loss. The valve cone is
of the soft seal type.
SR 6.2K is directly acting with piston actuation. The response pressure
has been pre-set.
SR 6.2P is pilot-controlled, the response pressure and the closing time
are adjustable. If a second pilot valve is used, the valve can be switched
to another pre-set response pressure.
At the control unit (closing piston) the inlet pressure is in balance with
the valve spring force (set value). If the inlet pressure rises above the set
value, the valve opens (in the pilot valve and/or in the inner chamber of
the main valve). With the inlet pressure falling the valve closes, driven by
the spring tension and the increasing pressure downstream of the
closing piston. In a depressurized line the valve remains closed.
The valves are completely tubed. Control lines or similar are not
required. The version for either horizontal or vertical installation can be
selected.
Standard
» ANSI or DIN flanges
» Coating of the body: primer and top coat
» MOD (manual opening device) for function control, bleeding or
flushing
» Vertical installation position
» Transport lugs
Options
» Coating as per DIN EN ISO 12944 C5-M, DIN 55633
» Special materials such as Duplex steel
» Various materials for O rings and seals, suitable for your medium
» Version for horizontal installation position incl. bridge (supporting
structure), position of the control element can be selected
» Enlarged MOD „manual opening device“ for viscous media
» Flow switch on the outlet side
» Media separator
» Tamper-proof adjustment elements for protection against
unauthorized access
» Exchangeable filter for the pilot system (SR 6.2P)
» Contamination level indicator for the pilot system (SR 6.2P)
» Special connection upon request
» Special versions on request
Operating instructions, know how and safety instructions must be
observed. The pressure has always been indicated as overpressure.
We reserve the right to alter technical specifications without notice.
| Kvs Values [m3/h] | |||||
| nominal diameter DN | 150 | 200 | 250 | 300 | 400 |
| SR 6.2K | 400 | 720 | 1000 | 1500 | 2000 |
| SR 6.2P | 470 | 850 | 1200 | 1800 | 240 |
| Cvs Values [US gal/min.] | |||||
| nominal diameter DN | 150 | 200 | 250 | 300 | 400 |
| SR 6.2K | 465 | 837 | 1183 | 1744 | 2325 |
| SR 6.2P | 547 | 988 | 1395 | 2093 | 2791 |
| Materials | |
| Body | steel- or CrNiMo steel welded |
| Inner Parts | CrNiMo steel |
| Pilot System | |
| MOD | |
| Valve Seal | HNBR |
| Piston Seal | PTFE |
| Piston Guide | PTFE |
| Pressure Springs | coated spring steel or CrNi steel |
| Dimensions [mm] | ||||
| size | nominal diameterDN | |||
| 150 | 200 | 250 | 300 | 400 |
| A* | on request | |||
| B |
* Overall length tolerances in acc. with DIN EN 558
| Weights [kg] | ||||
| nominal pressure | nominal diameter DN | |||
| 150 | 200 | 250 | 300 | 400 |
| PN 16 - 160 | on request |
| Customs Tariff Number |
| 84814010 |
Since the pressure relief valve SR 6.2 will be customized to your
operating data and its structural shape may vary considerably, we
cannot specify any detailed dimensions or weights. Please let us have
your enquiry.
Special designs on request.
The pressure has always been indicated as overpressure.
Mankenberg reserves the right to alter or improve the designs or
specifications of the products described herein without notice.
