Output Voltage:

• 12;24 Vdc

Output Direct Current:

• 1 phase: 0.6 - 2 - 2.8 A

Power Supply DFLEX are the best devices for industrial and domestic applications, especially suitable for applications for the automation of buildings. Ideal applications for low profile panel. Single phase input, range from 15 to 60W, in robust container. Wide range of input voltage. High temperature range from -25 + 70°C. Lower Output impedence. Operation in continuous mode, in short-circuit and overload situations. High Efficiency even at low power. Developed for mounting in: DIN Rail built in auto shooting also screw mount for wall applications without the addition of pieces.

Input Data

• Nominal input voltage range 100 – 240 Vac
• AC input voltage range 85 – 264 Vac (see Derating Curve)
• DC input voltage range 120 – 250 Vdc
• Connect N(+), L(-)
• AC frequency range 47 – 63 Hz
• Input current (approx.) 0.26 A (120 Vac)
• 0.17 A (230 Vac)
• Inrush current (typ.) 15 A (5 ms)
• Hold-up time
  • >15 ms (120 Vac)
  • >70 ms (230 Vac)
• Start-up delay (max.) 0.5 s
• Internal fuse T 2.5 A, slow-blow
• External MCB (recommended) 6 A (curve B)

Output Data

• Output voltage (factory setting) 24 Vdc 3%
• Output current 0.6 A (see Derating Curve)
• Output power 15 W (see Derating Curve)
• Maximum output current 1.2 A
• Residual ripple 50 mVpp (20 MHz, 50Ω)
• Efficiency 80 %
• Start-up with capacitive load 30.000F
• Over temperature protection Shut-down and automatic restart
• Overload protection Continuous current mode
• Short-circuit protection Continuous current mode
• Over voltage protection Yes (typ. 35 Vdc)
• Parallel connection Yes
• Series connection Yes

Environment Data

• Operational temperature -25 to 70 °C (see Derating Curve)
• Storage temperature -40 to 85 °C
• Operational humidity (25 °C) 90 %, no condensation

General Data

• Insulation voltage (Input/Output) 3000 Vac
• Protection class II
• Protection degree (EN 60529) IP 20
• Pollution degree 2
• MTBF > 500.000 h
• Screw type connection 0.2 - 2.5 mm2
• (24 – 12 AWG)
• 0.6 - 0.8 Nm
• Housing material Polycarbonate
• Foot latch material Plastic POM
• Dimension (WxHxD) 18 x 90 x 61 mm
• Weight (approx.) 0.1 Kg